Yealink CP960 - Stop Finding a Slave Phone; Configuring the Slave Phone; Joining a Star Connection Group

Yealink CP960 User Guide
142
1. Navigate to Settings->Advanced Settings (default password: admin)->CP Star Connection.
2. Tap the desired slave phone.
3. Tap Find.
The master phone will automatically find the slave phone in your area.
The slave phone will play the ring tone, and the mute key LED indicators on the phone flash green and red altern-
ately.
Related Topics
Setting Up a Star Connection Group
Joining a Star Connection Group
Stop Finding a Slave Phone
Stop Finding a Slave Phone
Procedure
1. Tap Exit on the master phone.
The slave phone will stop ringing.
Tip
You can also stop finding a slave phone by tapping any touch key on the slave phone.
Related Topic
Finding a Slave Phone
Configuring the Slave Phone
You can join a star connection group and quit the star connection group on the slave phone. You can also quickly find
a master phone.
Topics
Joining a Star Connection Group
Quitting a Star Connection Group
Finding a Master Phone
Stop Finding a Master Phone
Joining a Star Connection Group
Before You Begin
The master phone has set up a star connection group and is in broadcast status.
Procedure
1. Navigate to Settings->Advanced Settings (default password: admin)->CP Star Connection->Search Group.
The phone will automatically search for broadcasts sent by the master phone in your area.
2. Tap Join.
3. Enter the PIN number displayed on the master phone.
After reboot, the phone joins the star connection group successfully.