Yealink CP960 - Remote Phone Book

Yealink CP960 User Guide
94
Sending a Paging by a Multicast Paging Key
Before You Begin
You need to set a Multicast Paging key in advance.
Procedure
1. Tap the Multicast Paging key when the phone is idle.
Both your phone and receiver’s phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver’s phone in the speakerphone (hands-free) mode.
The following figure shows a multicast RTP session on the phone:
Related Topic
Setting a Multicast Paging Key
Sending Pages by a Paging List Key
Before You Begin
You need to set a Paging List key in advance.
Procedure
1. Tap the paging list key when the phone is idle.
2. Tap the desired paging group.
Both your phone and receiver’s phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver’s phone in the speakerphone (hands-free) mode.
Related Topic
Setting a Paging List Key