Yealink CP960 - Wireless Network Settings

To Next Page

To Previous Page

Yealink CP960 User Guide

1. Navigate to Settings->Basic Settings->Bluetooth.

2. Tap

after the desired Bluetooth-enabled mobile phone name.

3. Turn on Phone audio.

4. Tap

Related Topic

Pairing and Connecting the Bluetooth-enabled Mobile Phone

Handling a Mobile Phone Call on the IP Phone

You can handle a mobile phone call on your IP phones, the IP phone acts as a hands-free device for your mobile

phone.

The call information appears on both your IP phone and mobile phone screen. You can control the call’s audio to go

through the mobile phone or IP phone on your mobile phone. If you choose Bluetooth, the audio will go through the

IP phone; if you choose Handset earpiece or Speaker, the audio will go through the mobile phone.

Before You Begin

Make sure that the Bluetooth-enabled mobile phone is paired and connected to your IP phone, and the phone audio

feature is enabled.

Procedure

1. Do the following on the phone:

l Place a call. Tap the My Mobile line key first, and then place a call or multiple calls to the mobile contact.

l Answer a call. An incoming call to your mobile phone is also shown on the IP phones, you can answer the call

on the IP phone. The phone will firstly match the contacts in the mobile contacts directory to present the caller-

/callee identity when receiving/placing a mobile phone call.

l During the call, you can hold/resume, mute/unmute or end the call on the IP phone.

Other manuals for Yealink CP960