Call Features
73
Answering a Call When in a Call
Answering a Call Automatically
Answering a Call
Procedure
1. Tap Answer.
Answering a Call When in a Call
When you are in an active call and an incoming call arrives on the phone, the call waiting tone beeps, and the incom-
ing call information is displayed.
Before You Begin
Enable call waiting feature on the phone.
Procedure
1. Tap
.
The active call is placed on hold, and the incoming call becomes active.
Related Topic
Enabling Call Waiting
Enabling Call Waiting
Call waiting enables you to receive another call when there is already an active call on your phone. If it is disabled, the
new incoming call will be rejected automatically.
You can enable call waiting feature to avoid missing important calls during a call. You can also set the phone to play a
warning tone when the new incoming call arrives.
Before You Begin
Check with your system administrator if the call waiting on code or off code is required. If required, get it from your sys-
tem administrator.
Procedure
1. Navigate to Settings->Features->Call Waiting.
2. Turn on Call Waiting.
3. Turn on Play Tone.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or Off Code field.
5.
Tap
.
Answering a Call Automatically
Auto answer enables you to automatically answer an incoming call in speakerphone (hands-free) mode when your
phone is idle. You can also enable auto answer mute to mute the local microphone when an incoming call is answered
automatically.
Procedure
To Next Page
Loading...
