Using CP960 Star Connection Feature
143
The star connection name (for example, CP960-S1) is displayed on the idle screen, and a star connection icon
appears in the status bar.
Note
One CP960 phone can only join one star connection group.
Related Topics
Setting Up a Star Connection Group
Sending Broadcast from Master Phone
Quitting a Star Connection Group
Procedure
1. Navigate to Settings->Advanced Settings (default password: admin)->CP Star Connection.
2. Tap the desired slave phone.
3. Tap Quite Group.
The phone screen prompts you whether to quit the star connection group.
4. Tap OK.
After reboot, the phone quits the star connection group successfully.
Finding a Master Phone
Before You Begin
The phone has joined a star connection group.
Procedure
1. Tap Find master.
The slave phone will automatically find the master phone in your area.
The master phone will play the ring tone, and the mute key LED indicators on the phone flash green and red altern-
ately.
Related Topics
Joining a Star Connection Group
Stop Finding a Master Phone
Stop Finding a Master Phone
Procedure
1. Tap Exit on the slave phone.
The master phone will stop ringing.
Tip
You can also stop finding a master phone by tapping any touch key on the master phone.
Related Topic
To Next Page
Loading...
