Yealink CP960 - System Applications; Recorder

System Applications
121
Copying Recorded Audios to USB Flash Drive
Before You Begin
Before copying recorded audios to USB flash drive, you should connect a USB flash drive first.
Procedure
1. Tap to launch the Recorder application.
2. Tap
after the desired recorded audios.
3. Tap Copy to USB.
If the recorded audio is copied successfully, the phone screen will prompt “Copy successfully”.
The prompt “XX Copied” (XX indicates the date when the recorded audio is copied to the USB flash drive) appears
under the corresponding recorded audio.
Copying All Recorded Audios to USB Flash Drive
Before You Begin
Before copying recorded audios to USB flash drive, you should connect a USB flash drive first.
Procedure
1. Tap
to launch the Recorder application.
2. Tap Edit.
3. Check the radio box on the top-left of the screen to select all recordings.
4. Tap Copy to USB.
The prompt “XX Copied” (XX indicates the date when the recorded audio is copied to the USB flash drive) appears
under the corresponding recorded audio.
Renaming the Recorded Audios
Procedure
1. Tap to launch Recorder application.
3. If you want to rename the recorded audio saved in USB flash drive, tap USB.
4. Tap
after the desired recorded audio.
5. Tap Rename.
6. Enter the desired file name.
7. Tap OK.
Deleting a Recorded File
You can delete local recordings or call recordings in Recorder application. The local recorded audios are named of a
prefix “record@” and date & time stamp, while the call recordings are named of the date & time stamp.
Procedure
1. Tap to launch the Recorder application.