Yealink CP960 - Holding;Resuming a Conference Call; Muting;Unmuting a Conference Call; Splitting a Conference Call; Managing the Conference Participants

Yealink CP960 User Guide
86
Related Topics
Managing the Conference Participants
Managing the Conference Participants
Managing the Conference Participants
Holding/Resuming a Conference Call
When you place a conference call on hold, both other participants are placed on hold. Other participants cannot hear
each other until you resume the held conference call.
Procedure
1. Tap More->Hold to place the conference call on hold.
2.
Tap More->Resume or tap
the to resume the held conference call.
Muting/Unmuting a Conference Call
You can mute the local microphone during a conference call so that the other participants can hear each other except
you.
Procedure
1. Tap Mute to mute the conference call.
2. Tap Mute again to unmute the conference.
Splitting a Conference Call
You can split the conference call into individual calls. After you split a conference call, the conference call ends, and
other parties are held. You can resume the hold calls.
Procedure
1. Tap More->Split to split the conference call into individual calls on hold.
Managing the Conference Participants
You can manage conference participants in the following ways:
l Mute a participant.
l Hold a participant
l Remove a participant from the conference
l Split the participant from the conference
l View the participant information
Procedure
1. Tap the avatar of desired participant, you can do the following:
l Tap Far Mute to mute the participant. The muted participant can hear everyone, but no one can hear the muted
participant.
l Tap Remove to remove the participant from the conference.
l Tap Split to split the participant from the conference.
l Tap Hold to hold the participant.
l Tap Detail to view the participant information.
l
Tap to return to the conference screen.