Call Features
75
Rejecting Anonymous Calls Automatically
You can set your phone to automatically reject incoming calls from callers who have withheld their caller ID inform-
ation (including the name or phone number). As a result, your phone will not ring and you will not be notified of an
attempted call.
Before You Begin
Check with your system administrator if the anonymous call rejection on code or off code is required. If required, get it
from your system administrator.
Procedure
1. Navigate to Settings->Features->Anonymous.
2. Select the desired line.
3. Turn on Anonymous Rejection.
4. (Optional.) Turn on Send Rejection Code.
5. Enter the anonymous call rejection on code and off code respectively in the On Code and Off Code field beneath
the Send Rejection Code field.
6.
Tap
.
When the caller has anonymous call feature enabled and places a call to your IP phones, the call is automatically rejec-
ted.
Related Topic
Placing an Anonymous Call
Ending Calls
Procedure
1. Tap End Call.
Auto Redial
Auto Redial enables you to redial a phone number automatically when the callee is busy.
Topics
Setting the Auto Redial
Redialing a Call Automatically
Setting the Auto Redial
You can enable auto redial, set the number of auto redial attempts and the time to wait between redial attempts.
Procedure
1. Navigate to Settings->Features->Auto Redial.
2. Turn on Auto Redial.
3. Enter the desired time (between 1 and 300 seconds) in the Redial Interval field.
4. Enter the desired times (between 1 and 300) in the Redial Times field.
To Next Page
Loading...
