Yealink CP960 - Using the CP Wireless Expansion MIC CPW90; Placing the CPW90; Turning the CPW90 on or off

Using the CP Wireless Expansion Mic CPW90
133
Using the CP Wireless Expansion Mic CPW90
This chapter provides basic operating instructions for the wireless expansion microphone CPW90.
Topics
Placing the CPW90
Turning the CPW90 On or Off
Registering the CPW90
Registering the CPW90 with Another IP Phone
Unregistering the CPW90
Muting or Unmuting the CPW90
Idle Mode
Viewing CPW90 Information
Finding the CPW90
Charging the CPW90
CPW90 LED Instructions
CPW90 Working Frequency
Placing the CPW90
The CPW90 has rubber pads on its base to prevent it from sliding. You can place the CPW90 on a conference table. Do
the following to ensure optimal voice quality:
l The CPW90 should be less than 20 meters distant from the IP phones, and is not disturbed by obstacles.
l Place the CPW90 on a stable surface and keep it away from obstacles so that it can effectively pick up sounds.
Turning the CPW90 On or Off
Procedure
1. You can do the following to turn on the CPW90:
l Put the CPW90 on a charging cradle, the CPW90 starts up automatically.
l If you do not charge the CPW90, long tap on the CPW90 for 3 seconds.
The battery LED indicator glows solid green for one second and then goes out.
2. To turn off the CPW90, long tap on the CPW90 until the battery LED indicator on the CPW90 glows solid red
for 3 seconds and then goes out.