Call Features
91
1. Tap
to stop the playing.
Deleting a Recorded File
You can delete local recordings or call recordings in Recorder application. The local recorded audios are named of a
prefix “record@” and date & time stamp, while the call recordings are named of the date & time stamp.
Procedure
1. Tap to launch the Recorder application.
The phone screen shows all recorded files in the Audio Recorder list.
2. If you want to delete the recorded audio saved in USB flash drive, tap USB.
3. Tap
after the desired recorded audio.
4. Tap Delete.
The phone screen prompts you whether to delete the audio.
5. Tap OK.
Checking Storage Space
You can check the storage space (e.g., total space, available space) of the IP phone or connected USB flash drive.
Procedure
1. Tap to launch the Recorder application.
2. If you want to check the storage space of the USB flash drive, tap USB.
Multicast Paging
Multicast Paging allows you to easily and quickly broadcast instant audio announcements to users who are listening to
a specific multicast group on a specific channel.
The IP phone supports the following 31 channels:
l 0: Broadcasts are sent to channel 0. Note that the Yealink IP phones running old firmware version (old paging mech-
anism) can be regarded as listening to channel 0. It is the default channel.
l 1 to 25: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broadcasting
with Polycom IP phones which have 25 channels you can listen to.
l 26 to 30: Broadcasts are sent to channel 26 to 30. We recommend that you specify these channels when broad-
casting with Yealink IP phones running new firmware version (new paging mechanism).
To Next Page
Loading...
