Yealink CP960 - Handling Incoming Calls

Using CP960 Star Connection Feature
141
After the slave phones join the star connection group, a star connection icon appears in the status bar.
Related Topic
Sending Broadcast from Master Phone
Sending Broadcast from Master Phone
If your system administrator has specified your phone as a master phone, or you have set up a star connection group
on the phone, you can make the phone send broadcast for waiting for other slave phones to join the star connection
group.
Procedure
1. Navigate to Settings->Advanced Settings (default password: admin)->CP Star Connection->Start Broadcast.
The phone automatically generates a four-digit PIN number and sends the broadcast.
Related Topic
Setting Up a Star Connection Group
Removing a Slave Phone
You can remove a slave phone from the star connection group.
Procedure
1. Navigate to Settings->Advanced Settings (default password: admin)->CP Star Connection.
2. Select the desired slave phone.
3. Tap Remove.
The phone screen prompts you whether to remove the slave phone.
4. Tap OK.
The slave phone is removed from the star connection group successfully.
Dissolving a Star Connection Group
Procedure
1. Navigate to Settings->Advanced Settings (default password: admin)->CP Star Connection.
2. Tap the master phone icon.
3. Tap Dissolve Group.
The phone screen prompts you whether to dissolve the star connection group.
4. Tap OK.
The phone dissolves the star connection group successfully.
Finding a Slave Phone
Before You Begin
You have set up a star connection group, and a phone has joined this star connection group.
Procedure