Yealink CP960 - Basic Phone Features

Using the CP Wireless Expansion Mic CPW90
135
Registering the CPW90 with Another IP Phone
Procedure
1. Navigate to Settings->Basic Settings->Wireless Microphone.
2.
Tap
to search for CPW90.
3. Put the CPW90 on the charging cradle and make sure it is charging.
4. Long tapthe Mute key on the CPW90 for 5 seconds.
The CPW90 enters the registration mode. And the mute LED indicator on the CPW90 fast flashes yellow.
The CPW90 registers with the IP phone automatically.
Unregistering the CPW90
Procedure
1. Navigate to Settings->Basic Settings->Wireless Microphone.
2. Select the desired microphone and then tap Detail.
3. Tap Unbind to deregister the CPW90.
Muting or Unmuting the CPW90
Procedure
1. Tapthe Mute key to mute the call.
The mute LED indicator glows solid red. And the icon
appears on the status bar of the IP phone.
2. Tapthe Mute key again to unmute the call.
The mute LED indicator glows solid green. And the icon
disappears from the status bar of the IP phone.