Yealink CP960 - Setting a Paging List Key; Setting a Paging Group; Deleting a Paging Group

Call Features
93
Setting a Paging List Key
You can set a Paging List key to easily access the paging groups on the idle screen.
Procedure
1. Navigate to Settings->Features->Dsskey.
2. Select the desired line key.
3. Select Key Event from the Type field.
4. Select Paging List from the Key Type field.
5. (Optional.) Enter the string that will display on the phone screen in the Label field.
Tip
You can drag the line key to the Edit field to set a Paging List key.
Setting a Paging Group
Before You Begin
Get the multicast IP address and port number from your system administrator.
Procedure
1. Tap the paging list key when the phone is idle.
If the paging list key is not configured, you can also navigate to Settings->Features->Paging List to configure the
paging list.
2.
Tap
after the desired paging group.
The default tag is Empty if it is not configured before.
3. Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the Address field.
4. Enter the string that will display on the phone screen in the Label field.
5. Enter the desired channel between 0 and 30 in the Channel field.
6.
Tap
.
7. To set more paging groups, repeat steps 2 to 6.
Deleting a Paging Group
Procedure
1. Tap the paging list key when the phone is idle.
If the paging list key is not configured, you can also navigate to Settings->Features->Paging List to configure the
paging list.
2. Tap
after the desired paging group.
3. Tap Delete.
The phone screen prompts you whether to delete the paging group.
4. Tap OK.
If you want to delete all paging groups, you can tap
on the top-right of the touch screen.