Call Features
71
Note
Anonymous call is not available on all servers. Check with your system administrator to find out if this feature is available
on your phone.
You need to enable anonymous call for a specific line first, and then place calls in this line.
Topics
Enabling Anonymous Call
Placing an Anonymous Call
Enabling Anonymous Call
Before You Begin
Check with your system administrator if the anonymous call on code or off code is required. If required, get it from
your system administrator.
Procedure
1. Navigate to Settings->Features->Anonymous.
2. Select the desired line.
3. Turn on Local Anonymous.
4. (Optional.) Turn on Send Anony Code.
5. (Optional.) Enter the anonymous call on code and off code respectively in the On Code and Off Code field beneath
the Send Anony Code field.
6.
Tap
.
Placing an Anonymous Call
Before You Begin
Enable anonymous call for a specific line.
Procedure
1. Select the anonymous line to place a call.
The callee is prompted with an incoming call from anonymity.
To Next Page
Loading...
