Yealink CP960 Manual

Advanced Features
111
Retrieving a Held Call Remotely on a Shared line
If you place a call on hold on a shared line, you can resume this call at any time. When the shared line key shows a call
that is in a held state, you can resume the held call remotely from other user's phone.
Before You Begin
There is at least one call placed on public hold on the shared line.
Procedure
1. Do one of the following:
l
Tap .
l Long tap the desired line key.
Tap More->Retrieve to retrieve the call.
Barging In an Active Call on a Shared line
In SCA scenario, both you and other users can barge into an active call on the shared line. Only one user can barge into
a call at a time. After a user barges into a call, the call turns into a three-party conference.
Before You Begin
There is at least one active call on the shared line.
Procedure
1. Long tap the desired line key.
2. Tap More->Barge In to interrupt the active call.
Pulling a Shared Call on a Shared line
In SCA scenario, both you and other users can pull an existing call from another shared phone that is an active or hold
state.
Check with your system administrator to find out if this feature is available for your phone.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm