Yealink CP960 - Dial-now

Yealink CP960 User Guide
114
Before You Begin
Get the directed call pickup code from your system administrator.
Procedure
1. Drag the intercom key to the Edit field.
2. Enter the directed call pickup code in the Extension field.
3.
Tap
.
Related Topic
Setting an Intercom Key
Picking Up a Remote Call by Intercom Key
When the target extension receives an incoming call, the intercom key icon of the target extension will change to .
Before You Begin
The directed pickup code has set for Call Pickup feature by your system administrator or you have assigned the dir-
ected pickup code for an Intercom key in advance.
Procedure
1. Tap the Intercom key to pick up the incoming call directly.
Related Topic
Setting the Directed Call Pickup Code for Intercom Key
Answering an Intercom Call
By default, when there is an incoming intercom call, the phone plays a warning tone and this incoming call will be
answered automatically. You can configure the behavior when receiving an intercom call.
Topics
Setting Intercom
Answering an Intercom Call
Setting Intercom
You can configure the following behavior when receiving an intercom call.
Intercom Allow
Intercom Allow feature allows the IP phones to automatically answer an incoming intercom call. If you disable this fea-
ture, the phone will reject incoming intercom calls and send a busy message to the caller. Intercom Allow feature is
enabled by default.
Note
Your system administrator can set a period of delay time before the phone automatically answers intercom calls.
Intercom Mute