Using Your IP Phone with PC
131
Hold/Resume the PC Audio
When you place the PC audio on hold, you cannot hear any audio associated with the PC on your IP phone.
Procedure
1. Tap More->Hold.
2. Tap More->Resume or tap
to resume the PC audio.
Muting or Unmuting the Microphone
The following occurs when you mute the microphone:
l The other party cannot hear you but you can still hear all other parties.
l You cannot record your voice on PC.
Procedure
1. Tap Mute or the Mute touch key.
Mute key LED indicators glow solid red. The touch screen indicates that the audio is muted.
2. Tap Mute or the Mute touch key again to unmute the microphone.
Setting the IP Phone as PC Audio Device
If you connect a PC to the IP phone, the PC will use the IP phone to play audio from calls or media by default. If not,
you can set the IP phone as PC audio device. You can set the IP phone as PC audio device via softphone or PC.
Topics
Setting the IP Phone as PC Audio Device via Softphone
Setting the IP Phone as PC Audio Device via PC
Setting the IP Phone as PC Audio Device via Softphone
When your PC is connected to the IP phone, you can set the IP phone as PC audio input and output device via the soft-
phone. Then you can play audio from the calls using the IP phone speakers and use the IP phone as your microphone.
The following takes setting the IP phone as PC audio input and output device via Yealink VC Desktop as an example. If
you do not have the Yealink VC Desktop application, download the application from the Yealink VC Desktop Support
page.
Procedure
1. In the top-left corner of the window, click the avatar icon to enter the settings window.
2. Click Device.
3. Select 扬
声器(CP960) from the pull-down list of Speaker.
4. Select 麦
克风(CP960) from the pull-down list of Microphone.
5. (Optional) Click Mic Test to test the microphone.
6. (Optional) Click Sound Test to test the speaker.
Setting the IP Phone as PC Audio Device via PC
When your PC is connected to the IP phone, you can set the IP phone as the default audio device for your PC and play
audio from music and videos using the IP phone’s speaker.
Procedure