Yealink CP960 - Setting the Key Tone; Enabling Touch Sounds; Configuring Notification Sound; Enabling Silent Mode

Yealink CP960 User Guide
54
1.
Tap
.
2. Tap Local Directory to select the desired contact group.
3.
Tap
after the desired contact.
4. Select the desired ring tone from the Ring field.
The ring tone is played automatically. You can tap the Volume key to adjust the ringtone volume.
5.
Tap .
Related Topic
Adjusting the Audio Volume
Setting the Key Tone
You can set the phone to produce a sound when pressing the keypad keys. The key tone is enabled by default.
Procedure
1. Navigate to Settings->Basic Settings->Sound->Key Tone.
2. Turn on Key Tone.
3.
Tap
.
Enabling Touch Sounds
If you enable touch sounds, the phone will produce a sound when you tap an option on the touch screen.
Procedure
1. Navigate to Settings->Basic Settings->Sound->Touch Sounds.
2. Turn on Touch Sounds.
3.
Tap
.
Configuring Notification Sound
The phone will produce a notification sound when receiving a notification (e.g., incoming email notification).
Procedure
1. Navigate to Settings->Basic Settings->Sound.
2. Tap the desired notification sound from the Notification Sound field.
The notification sound is played automatically. You can tap the Volume key to adjust the notification sound.
3. Tap OK.
Enabling Silent Mode
If you turn on the silent mode, the IP phone won't produce ring tone/key tone/touch sound/notification sound from
phone's speaker.
Procedure
1. Do one of the following:
l From the home screen, navigate to Settings->Basic Settings->Sound.