Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
84
Description:
Configures VLAN ID for the PC port.
Note: It is not applicable to CP860/CP920 IP phones. It works only if the value of the
parameter “static.network.pc_port.enable” is set to 1 (Auto Negotiation). If you change this
parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->VLAN->PC Port->VID (1-4094)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->VID Number
static.network.vlan.pc_port_priority
Description:
Configures VLAN priority for the PC port.
7 is the highest priority, 0 is the lowest priority.
Note: It is not applicable to CP860/CP920 IP phones. It works only if the value of the
parameter “static.network.pc_port.enable” is set to 1 (Auto Negotiation). If you change this
parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->VLAN >PC Port->Priority
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->Priority
To configure VLAN for Internet port via web user interface:
1. Click on Network->Advanced.
2. In the WAN Port block, select the desired value from the pull-down list of Active.
3. Enter the VLAN ID in the VID (1-4094) field.