Yealink SIP-T52S - Page 743

Configuring Advanced Features
717
es-general&q=load
Details of the Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.logon_wizard
0 or 1
0
Description:
Enables or disables the IP phone to provide the logon wizard during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860/CP920 IP phones. It works only if there is no registered
account on the IP phone.
Web User Interface:
Features->General Information->Logon Wizard
Phone User Interface:
None
hotdesking.startup_register_name_enable
0 or 1
0
Description:
Enables or disables the IP phone to provide input field of register name on the logon
wizard during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860/CP920 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter “phone_setting.logon_wizard” is
set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
hotdesking.startup_username_enable
0 or 1
1
Description:
Enables or disables the IP phone to provide input field of user name on the logon wizard
during the first startup.
0-Disabled