Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
718
1-Enabled
Note: It is not applicable to CP860/CP920 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter “phone_setting.logon_wizard” is
set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
hotdesking.startup_password_enable
Description:
Enables or disables the IP phone to provide input field of password on the logon wizard
during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860/CP920 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter “phone_setting.logon_wizard” is
set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
hotdesking.startup_sip_server_enable
Description:
Enables or disables the IP phone to provide input field of SIP server on the logon wizard
during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860/CP920 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter “phone_setting.logon_wizard” is
set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None