Zebra EA3600 Series - Revision History

ii EA3600 Network Connect Product Reference Guide
Revision History
Changes to the original guide are listed below:
Change Date Description
-01 Rev. A 5/2017 Initial Release
-02 Rev. A 1/2018 Updates:
- Enable Transfer and Select Transfer Mode table, Data Sent to EA3600 column
- Removed ’all caps’ from chapter headings; changed Ethernet/IP to EtherNet/IP
-03 Rev. A 8/2018 Updated:
- Figure 1-3 - 12V power supply must be purchased separately.
-04 Rev. A 4/2019 Updated:
- Table 2-2
- Table 2-3
- Ethernet IP chapter
Added:
- Configuring Using the EA3600 Add On Profile
- Config Port to Device Configuration parameter settings.
- New section for programming device with barcodes.
- New chapter for TCP/IP.