Zebra TC25 Integrator Guide

Settings
134
Tombstone Module
The Tombstone Module collects tombstone (Linux Native Crashes) logs from the device.
• Enable Module - Enables logging for this module.
• Log path - Specifies the location to store the Tombstone output log files.
• Collect Historic tombstones -
Configuration File
RxLogger configuration can be set using an XML file. The config.xmlconfiguration file is located on the microSD
card in the
RxLogger\config folder. Copy the file from the device to a host computer using a USB connection. Edit
the configuration file and the replace the .XML file on the device. There is no need to stop and restart the RxLogger
service since the file change is automatically detected.
Enabling Logging
To enable logging:
1. Swipe the screen up and select .
2. Touch Start.
3. Touch .
Disabling Logging
To disable logging:
1. Swipe the screen up and select .
2. Touch Stop.
3. Touch .
Extracting Log Files
1. Connect the device to a host computer using an USB connection.
2. Using a file explorer, navigate to the RxLogger folder.
3. Copy the file from the device to the host computer.
4. Disconnect the device from the host computer.

Zebra TC25 Specifications

General

Brand	Zebra
Model	TC25
Category	Cell Phone
Language	English