Getting Started
68
Transferring Files using Photo Transfer Protocol
1. Connect the USB-C Cable to the TC25 or place the TC25 into the 1-Slot Ethernet Cradle. See Accessories for
setup information.
2. Pull down the Notification panel and touch USB for Charging.
Figure 65 Use USB Dialog Box
3. Touch Transfer photos (PTP).
4. On the host computer, open a file explorer application.
5. Open the SD card or the Internal storage folder.
6. Copy or delete photos as required.
Disconnect from the Host Computer
1. On the host computer, unmount the device.
2. Remove the USB-C Cable from the device or remove the device from the cradle.
NOTE Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory to the
host computer.
CAUTION Carefully follow the host computer’s instructions to unmount the microSD card and disconnect USB
devices correctly to avoid losing information.
To Next Page
Loading...
Need help?
General
