Zebra TC25 Integrator Guide

20
Getting Started
Introduction
This chapter provides information for getting the device up and running for the first time.
Setup
Perform this procedure to start using the TC25 for the first time.
1. Install a micro secure digital (SD) card (optional).
2. Install a nano SIM card
3. Charge the TC25.
4. Power on the TC25.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the access door. Refer to
the documentation provided with the card for more information, and follow the manufacturer’s recommendations for
use.
1. Using a 0# Phillips screwdriver, remove two screws securing the access door.
CAUTION Use proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper
ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator
is properly grounded.

Zebra TC25 Specifications

General

Brand	Zebra
Model	TC25
Category	Cell Phone
Language	English