Wireless
115
Enabling Bluetooth
1. Swipe down with two fingers from the status bar to open the quick access panel.
2. Touch to turn Bluetooth on.
3. Touch Done.
4. Touch .
Disabling Bluetooth
1. Swipe down with two fingers from the status bar to open the quick access panel.
2. Touch .
3. Touch the slider switch to turn off Bluetooth.
4. Touch .
Discovering Bluetooth Device(s)
The TC25 can receive information from discovered devices without pairing. However, once paired, the TC25 and a
paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the
area:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Swipe down with two fingers from the status bar to open the quick access panel.
5. Touch Bluetooth.
6. Touch More Settings. The Bluetooth screen appears.
7. The TC25 begins searching for discoverable Bluetooth devices in the area and displays them under Available
devices.
8. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.
9. Enter a PIN in the text box and touch OK. Enter the same PIN on the other device.
10. For Simple Pairing, touch Pair on both devices.
11. The Bluetooth device is added to the Bluetooth devices list and a trusted (“paired”) connection is established.
Changing the Bluetooth Name
By default, the TC25 has a generic Bluetooth name that is visible to other devices when connected.
1. Swipe down from the status bar and then touch .
2. Touch Bluetooth.
3. If Bluetooth is not on, touch the switch to turn Bluetooth on.
4. Touch .
5. Touch Rename this device.
6. Enter a name and touch Rename.
7. Touch .
To Next Page
Loading...
Need help?
General
