Zebra TC25 - Replacing the SIM Card

Getting Started
24
Figure 18 Secure Access Door
13. Replace the hand strap, if required.
14. Press and hold the Power button to turn on the TC25.
Replacing the SIM Card
To replace the SIM card:
1. Press the Power button until the menu appears.
2. Touch Power off.
3. Touch OK.
4. If hand strap is attached, slide the hand strap clip up toward the top of the TC25 and then lift.
5. Using a 0# Phillips screwdriver, remove two screws securing the access door.
NOTE Only use a nano SIM card.
CAUTION Access door must be replaced and securely seated to ensure proper device sealing.
TC25 must be powered off when replacing the SIM card.