Zebra TC25 - Settings; Battery Test Information; GPS Test Information

Applications
94
Figure 82 Battery Subsystem Details
Settings
By default only the Battery and System tests are enabled. To enable other tests:
1. Touch > Settings.
2. Touch to the left of the test name. A green box with a checkmark appears.
3. Touch SAVE.
4. Touch Yes to confirm.
5. Touch .
Battery Test Information
The Battery Test obtains the following information:
• Battery Level - Indicates the current battery charge level.
• Battery Voltage - Indicates the current battery voltage.
• Status - Indicates if the battery is charging (on AC power) or discharging (on battery power).
• Power Source - Indicates whether the device is receiving power from the battery or from an external
source.
• Temperature - Indicates the current battery temperature.
• Charge Cycles - Not applicable.
• Backup Battery Voltage - Indicates backup battery voltage.
• Manufacture Date - Displays the manufacture date of the battery.
GPS Test Information
The GPS Test obtains the following information:
• GPS Provider Enabled - Indicates if GPS is enabled (true) or disabled (false).
• Latitude - Indicates current latitude position.
• Longitude - Indicates current longitude position.
• Altitude - Indicates current altitude in meters.