Zebra TC25 User Manual

Accessories
131
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs battery
charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the device or
cradle may for small periods of time alternately enable and disable battery charging to keep the battery at
acceptable temperatures. The power pack indicates when charging is disabled due to abnormal temperatures via
its LED.
Check Power Level
To check the power level of the power pack, press the LED button. The LEDs light indicating the charge level. After
five seconds the LEDs turn off.
Figure 118 Check Power Level
Solid Solid Flashing
Change level is between 66% and 95%.
Solid Solid Solid
Fully charged (95-100%).
Flashing
Charging error, e.g.:
• Temperature is too low or too high.
• Charging has gone on too long without completion
(typically 10 hours).
Table 15 LED Charging Indicators (Continued)
LED State
LED 1 LED 2 LED 3 LED 4 Indication
LED 1LED 2LED 3LED 4
LED Button

Zebra TC25 Specifications

General

Brand	Zebra
Model	TC25
Category	Cell Phone
Language	English