Zebra TC25 User Manual

Accessories
143
Hand Strap
The hand strap provides securing when holding the device.
To install the hand strap on the TC25:
1. Feed the top end of the hand strap through the slot at the top of the TC25.
Figure 137 Insert Hand Strap Through Top Mounting Point
2. Pull the end through the slot.
Figure 138 Feed End Through Slot
3. Insert the end of the hand strap into the slot on the hand strap.
4. Pull the end until the notch sits into the slot.
5. Feed the other end of the hand strap through the slot at the bottom of the TC25.
Figure 139 Insert Hand Strap Through Bottom Mounting Point
6. Pull the end through the slot.
7. Press the hook material against the loop material.

Zebra TC25 Specifications

General

Brand	Zebra
Model	TC25
Category	Cell Phone
Language	English