Zebra TC25 User Manual

Accessories
144
Figure 140 Adjust and Close Hand Strap End
8. Place hand between device and hand strap and adjust hand strap as necessary.
To install the hand strap on the TC25 with Extended Power Pack:
1. Feed the top end of the hand strap through the slot at the top of the TC25.
Figure 141 Insert Hand Strap Through Top Mounting Point
2. Pull the end through the slot.
3. Insert the end of the hand strap into the slot on the hand strap.
4. Pull the end until the notch sits into the slot.
Figure 142 Feed End Through Slot
5. Feed the other end of the hand strap through the slot at the bottom of the TC25.
6. Slide the TC25 into the Extended Power Pack.
Figure 143 Insert Hand Strap Through Power Pack Bottom Mounting Point

Zebra TC25 Specifications

General

Brand	Zebra
Model	TC25
Category	Cell Phone
Language	English