Accessories
81
USB IO Hub
The USB I/O Hub:
• provides power to a vehicle cradle
• provides USB hub for three USB devices (such as printers)
• provides a powered USB port for charging another device.
The cradle is powered by the vehicle’s 12V or 24V electrical system. The operating voltage range is 9V to
32V and supplies a maximum current of 3A to the vehicle cradle and 1.5 A to the four USB ports
simultaneously.
Refer to the device Integrator Guide for Android 8.1 Oreo for information on installing the USB I/O Hub.
Figure 50 USB I/O Hub
Connecting Cables to the USB IO Hub
The USB I/O Hub provides three USB ports for connecting devices such as printers to a device in the
vehicle cradle. To connect USB cables:
1. Slide the cable cover down and remove.
To Next Page
Loading...