Getting Started
26
3.
Insert the battery, bottom first, into the battery compartment in the back of the device.
4. Press the battery down into the battery compartment until the battery release latches snap into place.
5. Place hand strap clip into hand strap mounting slot and pull down until it snaps into place.
Installing the Battery
NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags,
engravings, stickers, etc., may compromise the intended performance of the device or accessories.
Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble),
functionality, temperature resistance, etc. could be effected. DO NOT put any labels, asset tags,
engravings, stickers, etc. in the battery well.
To Next Page
Loading...