Zebra TC72 User Manual

Maintenance and Troubleshooting
113
Spare Battery not
charging.
Charger is not
receiving
power.
Ensure the power cable is connected securely to both the
charger and to AC power.
Spare battery
is not correctly
seated.
Remove and re-insert the battery into the battery adapter,
ensuring it is correctly seated.
Battery
adapter is not
seated
properly.
Remove and re-insert the battery adapter into the charger,
ensuring it is correctly seated.
Battery was
removed from
the charger or
charger was
unplugged
from AC power
too soon.
Ensure charger is receiving power. Ensure the spare battery
is seated correctly. If a battery is fully depleted, it can take up
to five hours to fully recharge a Standard Battery and it can
take up to eight hours to fully recharge an Extended Life
Battery.
Battery is
faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
Table 22 Troubleshooting the 4-Slot Battery Charger (Continued)
Problem Cause Solution

Zebra TC72 Specifications

General

Display diagonal	4.7 \
Touch technology	Dual-touch
Touchscreen type	Capacitive
Display resolution	1280 x 720 pixels
Internal memory	4 GB
Internal memory type	-
Total storage capacity	32 GB
Compatible memory cards	MicroSD (TransFlash), SDHC, SDXC
Processor model	660
Processor family	Snapdragon
Processor frequency	2.2 GHz
Processor manufacturer	Qualcomm
Operating system installed	Android
Rear camera aperture number	2.4
Rear camera resolution (numeric)	13 MP
Front camera resolution (numeric)	5 MP
USB 2.0 ports quantity	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery voltage	3.7 V
Battery capacity	4620 mAh
Scanner type	1D/2D
Product color	Black, Silver
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	28 mm
Width	84 mm
Height	161 mm
Weight	376 g