Getting Started
33
4.
If hand strap is attached, slide the hand strap clip up toward the top of the device and then lift.
5. Press the two battery latches in.
6. Lift the battery from the device.
7. If the device has a secure access door, use a Microstix 0 screwdriver to remove the 3ULR-0 screw.
8. Lift the access door.
9. Slide the microSD card holder to the Open position.
10. Lift the microSD card holder.
11. Remove microSD card from holder.
12. Insert the replacement microSD card into the card holder door ensuring that the card slides into the
holding tabs on each side of the door.
To Next Page
Loading...