EasyManua.ls Logo

Zebra TC72 - Page 79

Zebra TC72
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications
79
GPS location - Add GPS location information to the photo meta-data. Turn On or Off (default).
Picture size - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels, 5M pixels, 3M
pixels, HD 1080, 2M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
Picture quality - Set the picture quality setting to: Low, Standard (default) or High.
Countdown timer - Select Off (default), 2 seconds, 5 seconds or 10 seconds.
•Storage – Set the location to store the photo to: Phone or SD Card.
Continuous Shot - Select to take a series of photos quickly while holding the capture button. Off
(default) or On.
Face Detection - Set the camera to automatically adjust the focus for faces.
•ISO - Set camera sensitivity to light to: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400,
ISO800 or ISO1600.
Exposure - Set the exposure settings to: +2, +1, 0(default), -1 or -2.
White balance
- Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors:
Incandescent - Adjust the white balance for incandescent lighting.
Fluorescent - Adjust the white balance for florescent lighting.
Auto - Adjust the white balance automatically (default).
Daylight - Adjust the white balance for daylight.
Cloudy - Adjust the white balance for a cloudy environment.
Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
•ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled).
Shutter Sound - Select to play a shutter sound when taking a photo. Options: Disable (default) or
Enable.
Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not
constant. These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing
continuous. The camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50
Hz, or Off.
Front Camera Photo Settings
Selfie Flash - Turns screen white to help produce a little extra light in dimmer settings. Options: Off
(default), or On.
GPS location - Add GPS location information to the photo meta-data. Options: On or Off
(default).
Picture size - Set the size (in pixels) of the photo to: 5M pixels (default), 3M pixels, HD1080, 2M
pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
Picture quality - Set the picture quality setting to: Low, Standard (default) or High.
Countdown timer - Set to: Off (default), 2 seconds, 5 seconds or 10 seconds.
•Storage – Set location to store the photo to: Phone or SD Card.
Continuous Shot - Select to take a series of photos quickly while holding the capture button. Off
(default) or On.

Table of Contents

Other manuals for Zebra TC72

Related product manuals