Allowed load of the tractor and axles
Table
The real value according to the calculation must be lower or equal to the allowed value specified by the
tractor manufacturer.
The driveability of the front axle must be preserved under all load conditions, i.e., min. 20% of the real tractor
weight must lie on the front axle
G
H max
- allowed load of the rear axle
Real value
according to
the calculation
Allowed value
according to
the
manufacturer
Total tractor weight 6,500 kg
Front axle load 2,600 kg
Rear axle load 5,000 kg
During aggregation with side moving machines, side ditch
trimmers and similar types of aggregation, there is an
unequal distribution of the load on the right and on the left
side of the tractor axle. It is necessary to ensure that the
load on one side of the axle does not exceed ½ of the
allowed load of the rear axle of the tractor.
GT_6
MAIN TECHNICAL PARAMETERS
To Next Page
Loading...
Need help?
General