Zmorph VX - Page 102

3D printing workow
102
Dual PRO Extruder
Functions allowing to change parameters during the printing process:
The "Sleep" function
allows you to put the
printer into sleep/store
mode and is described in
the 12.18 chapter.
To return to the previous
screen, select "LESS" or
return to the main print-
ing screen by pressing
the "BACK" button.
Choose "Settings" The Print Speed part
allows you to change the
print speed. Select plus
to increase or decrease
the speed from 5% to
300% of the initial speed.
The "Fan Speed" section
allows you to change the
settings of the fan, the
"on" option turns on the
fan at 100% and the "off"
function turns off the fan.
After selecting the "auto"
option, the speed of the
fan is set according to
the G-code.