Zmorph VX User Manual

3D printing workow
105
12.16 Support removal
The printer will ask you
to conrm your decision.
To do this, choose "YES".
If you do not want the
printer to go into hiber-
nate mode choose "NO".
Wait for the extruder to
nish printing and stop at
the right place.
The printer is ready to
disconnect the pow-
er supply safely when
prompted.
To be able to print mod-
els with more complex
geometry, additional
support is printed, which
is not part of the mod-
el. When the printout is
complete, remove them
carefully. Pliers are best
suited for this purpose.
In case of problems with
removing the support,
you can use a knife to
help you.
Choose "Settings". Choose "More". Choose "Sleep".
12.17 Hibernation
This option allows you to safely pause printing, with the option of resuming it if you
need to disconnect the printer from the power supply. Hibernation should not be used
to pause printer operation for a long time due to the cooling of the table and extruder.

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English