Zmorph VX - 3 D Printing Materials

3D printing workow
52
• Temperature control: 2 thermistors
• Temperature range: 0 – 250 ˚C
• Nozzle: 0.4 mm
• Motor: Nema 11 stepper motor with planetary gear x2
• Extrusion: Direct Drive
• Work area: up to 235 x 250 x 165 mm
• Recommended printing resolution: 0.2 mm
• Supported printing resolution: 0.025 – 0.4 mm
• Extruder dimensions: 170 x 115 x 70 mm
12.2. 3D printing materials
Single Plastic Extruder 1.75
PLA ABS Nylon PET-G ASA
PMMA TPE PC PC/ABS PP
PVA HIPS