Zmorph VX - Pause and Resume Printing

3D printing workow
103
12.13 Pause and resume printing
The "Sleep" function
allows you to put the
printer into sleep/store
mode and is described in
the 12.18 chapter.
To return to the previous
screen, select "LESS" or
return to the main print-
ing screen by pressing
the "BACK" button.
While the machine is
running, press the ‘Pause’
button on the screen to
stop printing.
Choose "Play" to contin-
ue printing. The printer
will resume the printout
exactly where it was
stopped.
Choose "More". The Heat function allows
you to change the tem-
perature of the extruder
and the table. Choose
"Heat" and tap the need-
ed temperature on key-
board, then "OK".
The "Filament Change"
function allows you to
change the lament
during the printout and is
described in the chapter
"Filament replacement
during printing".