Zmorph VX User Manual

Certicates
15
4. Certicates
UE/EC DECLARATION OF CONFORMITY
Manufacturer/address:
ZMorph S.A.
ul. Teczowa 57, 53-601 Wrocław, Poland
Object of the declaration:
Personal fabricator
Type/model: ZMORPH VX
Object of the declaration described above is in conformity with the directives:
EMC 2014/30/UE; RoHS 2011/65/WE; LVD 2014/35/UE; MAD 2006/42/WE
The object also is in conformity with the relevant community harmonisation legislation:
PN-EN 55011:2016-05; PN-EN 61000-3-3:2013:10; PN-EN 61000-4-2:2011; PN-EN
61000-4-3:2007+A1:2008+A2:2011; PN-EN 61000-4-4:2013:05; PN-EN 61000-4-5:2014-10;
PN-EN 61000-4-6:2014-04; PN-EN 61000-4-11:2007; PN-EN 61000-4-11:2007;
PN-EN 61000-3-2:2014-10; PN-EN 55011-1:2012 group 1; PN-EN 55011-:2012 class B;
PN-EN 61000-3-3:2013; PN-EN 61000-3-2:2014-10; PN-EN 61000-4-4:2013;
PN-EN 61000-4-3:2007; PN-EN 61000-4-6:2009; PN-EN 61000-4-5:2014; PN-EN 61000-4-11:2007.
The declaration was issued as a result of the conformity assessment procedure
conducted with the directives.
Conrmed by the sign:
Independent laboratory tests were conducted.
Any change made to this device will void this declaration.
It is forbidden to use the device against its intended use.
This declaration of conformity is issued under the sole responsibility of the Manufacturer.
The technical documentation is kept at the Manufacturer address.
Wrocław 01.10.2018r.
ZMorph S.A,
ul. Tęczowa 57, 53-601 Wrocław
NIP: 899-274-32-04
KRS: 0000724021
+48 71 33 68 923, contact@zmorph3d.com
www.zmorph3d.com
ZMorph S.A. z siedzibą we Wrocławiu, zarejestrowana w Sądzie Rejonowym dla Wrocławia-Fabrycznej we Wrocławiu,
IV Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000724021, NIP 899-274-32-04, REGON 022111640.
Kapitał zakładowy: 160 526,40 zł opłacony w całości.

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English