Zmorph VX - Maintenance; Toolheads Maintenance

Maintenance
32
10. Maintenance
10.1 Toolheads maintenance
Changing and mounting toolheads require 3 mm Allen key
usage. It is included in the foam insert with accessories.
Toolhead disassembly
Select "Maintenance". Select "Change tool". Select "PARK TOOL", wait
for positioning process
to be nished.
Disconnect the toolhead
cable from the machine
frame socket.
Disconnect the toolhead
from the X carriage.
Use 3 mm Allen key to
loose the screw mount-
ing the toolhead.
Lift the toolhead from the
front to back from the
x-carriage.
Printer is ready for
mounting another tool-
head.