Zmorph VX - Components

To Next Page

To Previous Page

Machine specication

8.2 Components

• X-axis - double-toothed belt system driven by a stepper motor and stainless steel rods

as guiding elements. Used for movement of the ZMorph VX toolhead. Must be period-

ically lubricated to ensure a long life of the machine.

• Y-axis - double-toothed belt system driven by a stepper motor and hybrid (linear/slid-

ing) rails as guiding elements. Used for movement of ZMorph VX worktable. Must be

periodically lubricated to ensure a long life of the machine.

• Z-axis - axis driven by double stepper motors with integrated trapezoidal screws and

high-quality POM trapezoidal nuts. Guiding elements are stainless steel rods and lin-

ear bearings. Used for movement of X-axis of ZMorph VX machine. Must be periodi-

cally lubricated to ensure a long life of the machine.

Other manuals for Zmorph VX