Zmorph VX - Materials Compatible with CNC PRO Toolhead; Material Fixturing for CNC

CNC milling workow
108
13.2 Materials compatible with CNC PRO toolhead
CNC PRO toolhead allows for milling in soft materials.
The list of tested materials is as follows:
• Wood derivatives: wood, plywood, wood ber boards
• Plastics: ABS, nylon, HDPE, PTFE, PC, PP, POM, PMMA, PVC, HIPS, LDPE, PET
• Composites: carbon ber laminate, copper clad laminate FR4, Dibond, TCF
• Metals: aluminim, brass, copper
• Others: cardboard, machining wax, modelling board, styrodur
To explore all materials please follow this link to ZMorph Materials Library:
https://zmorph3d.com/product/materials.
13.3 Material xturing
For proper material xturing during CNC milling operation you need to mount aluminium
bed that is added to every ZMorph VX Full Set or is available in store. To learn how to
change your worktable, follow next parts of the manual.
CNC Worktable explained
Your aluminum worktable can be divided into two xturing areas.
• For materials smaller than workspace of ZMorph VX there are T-slots milled for mount-
ing your workholding with M4 screws and square nuts.