Zmorph VX - 3 D Printing Workflow; Toolheads Explained

3D printing workow
49
12. 3D printing workow
12.1 Toolheads
Single Plastic Extruder 1.75 mm
Basic toolhead giving access to all 3D printing functionalities using 1.75 mm laments.
It’s perfect for manufacturing single-material prototypes, jigs and xtures, and other
high-quality models from almost all materials available on the market such as: ABS,
M-ABS, PLA, HIPS, Flex, PVA, PET, ASA and similar. Single Plastic Extruder 1.75 mm is
included in all machine sets. Default nozzle is 0.3 mm.
Toolhead Specication:
• Construction: High-quality 3 mm aluminium frame
• Hot End: ZMorph interchangeable nozzle 1.75 mm
• Temperature control: 1 thermistor
• Temperature range: 0 - 250 ˚C degrees
Cooling fan
Nozzle
Heating block
Thermistor
Heat break
"A" plug
Pressure adjustment screws
Stepper motor 1.75
Toolhead cable