Zmorph VX - Milling Cutter Fastening

CNC milling workow
110
Below you can nd most common solutions with pros and cons of every one of them.
Workholding Usable for Ease of use Pros Cons
Double sided
tape
Sheet material
Block material
1/5
-> Cheap
-> Easy to use
-> Does not stick
out above mate-
rial surface
-> Surface must
be scraped of
tape residues
Sheet clamps
(added to
ZMorph VX)
Sheet material 3/5
-> Can be cus-
tom 3D printed
-> Harder to use
-> Only for at,
sheet materials
like plywood
Step clamps
Sheet material
Block material
2/5
-> Allow for
mounting mate-
rials of different
heights
-> Stick out
above material
surface
Vises Block material 2/5
-> Robust
-> Can be cus-
tom 3D printed
-> Must have
custom mount to
CNC worktable
13.4 Milling cutter fastening
To ensure safe and reliable milling process, you must properly mount your milling cutter.
The process is the same regardless of cutter type and geometry.
Remove CNC Pro tool-
head from your machine.
Take 13/10 and an ad-
justable wrench.
Slide 13-sized end of
wrench into shown slot.