Zmorph VX - Thick Paste Extruder; Thick Paste Extruder Overview

Thick Paste Extruder workow
142
15. Thick Paste Extruder
15.1 Thick Paste Extruder
Thick Paste Extruder is a toolhead usable in 2D and 3D printing. It consists of a stepper
motor that pushes material in syringe through nozzle.
Main elements of Thick Paste Extruder:
Nozzle
Aluminium mounting base
Piston Cables
Syringe Stepper motor
Specication:
Construction: 3 mm aluminum base with ABS printed parts
Nozzle: 2 mm, 4 mm
Motor: Nema 17 stepper motor
Default work speed: 10 mm/s (depends on the material)
Extrusion: Direct Drive
Work area: up to 250 x 235 x 165 mm (without covers)
Recommended printing resolution: 2 mm layer height (2000 microns)
Supported printing resolution: 0.5 - 4 mm layer height (500 - 4000 microns)
Material capacity: 100 ml
Extruder dimensions: 90 x 55 x 271 - 380 mm