Zmorph VX - Loading the Filament

3D printing workow
53
Dual PRO
Prepare the material.
The 0.5 kg spool is
included to the package.
Take out the lament roll
from the plastic foil, re-
move moisture absorber.
You can nd out what
kind of lament you
own by looking at the
sticker on the lament
roll. ZMorph VX package
comes with PLA.
Slide spool on the bar
and place it on the ma-
chine.
PLA-PLA ABS-HIPS PLA-PVA ABS/ABS
12.3 Loading the lament
Single Plastic Extruder
NOTE: check the material library for more information about
our materials: http://bit.ly/ZMorphMaterialsLibrary