Manual guide
6
1. Manual guide
1.1 Introduction
This manual describes the basic information about ZMorph VX, safety precautions,
preparation for operations and basic maintenance. Read this manual guide carefully
and understandably before operating the device for the rst time. Ignorance of the in-
structions may result in damage to the device, personal injury or reduced quality of the
printed parts. Make sure that everyone who uses the device has read and followed these
instructions. The manufacturer of the equipment makes every effort to ensure that the
safety of use, transport, storage and disposal is at the highest level. However, the manu-
facturer has no direct control over the user and the use of the device, therefore he is not
liable for injury, damage and costs resulting from non-compliance with these instruc-
tions.
1.2 Markings contained in the instructions guide and on the device
Moving parts hazard - to avoid injury or damage to parts of the body, do
not reach inside the unit or insert any foreign objects while the unit is in
operation, during operation or at rest.
High voltage - this symbol indicates the area where the user may be elec-
trocuted.
Hot surface - this symbol warns of high temperatures to avoid burns.
ZMorph VX Nameplate
To Next Page
Loading...
Need help?
General
